0 items in the shopping cart
 
Electrical Outlet Cutout Tool by Blind Mark

Electrical Outlet Cutout Tool by Blind Mark

This innovative patented drywall / paneling tool saves valuable time and money during the drywall / paneling process. It completely eliminates the need for measuring while easily identifying electrica

Our Price: $46.95
Quantity  
 
Purchase at this preferred retailer.
More Products By: Blind Mark

Help Small Brands Grow by Pinning Them - Pin It

UPC Code: 854979001007
Shipping Weight: 1.05 Pounds
Ships Immediately
Product Views: 42510


Suggest Retailers Who May Be Interested In This Product.
Qualified Retailers Can Order A Free Sample Of This Product.

Product Videos




More Information

All New Blind Mark Drywall Electrical Outlet Cutout Tool!

This innovative patented drywall / paneling tool saves valuable time and money during the drywall / paneling process. It completely eliminates the need for measuring while easily identifying electrical boxes. The process is quick and simple - completely error proof. No more wasted drywall / paneling sheets. Watch the product demonstration below to see how Blind Mark will save you time, money, and improve the quality of your drywall / paneling project. Whether you fall into the category of professional, do-it-yourselfer (DIY), or first timer, with the Crorey Builders Inc. paneling and drywall tools, installing drywall or installing paneling has never been easier.

Blind Mark: The Five Easy Steps

Step 1
Place Blind Mark Target, with the arrow pointing up, in Electrical Box. If you have a multiple gang box, install the targets at each end of the box.
Step 2
Rough Install Drywall. Once the Blind Mark Target is installed in the box, cover the box up with the drywall. Position your drywall in the exact location and fasten it top and bottom with drywall screws.
Step 3
With the arrow on the Blind Mark Locator facing up, pass the the Locator across the area in which the Blind Mark Target is Located. The Locator will find the Target and snap in place. Do not force the Locator into position. Hold the sides of the Locator and let it jump to the final position on its own. If the Locator does not look plum, rotate it right or left until it appears plum. Then, take your pencil and mark around the Locator, outlining the box perimeter.
Step 4
Remove the Blind Mark Locator from the drywall. Cut out the drywall using your mark as a guide. If you are using a handsaw, keep in mind that the cut on the side where the stud is must be a shallow cut. A variety of tools (manual or power) can be used to cut the drywall.
Step 5
Remove the drywall cutout and the Blind Mark Target. Finish screwing down the drywall and you are done.

Note: When you are using metal studs, the Blind Mark Target and Locator can be used as a stud finder taking away the frustration of missing a stud during final installation of drywall.

Customer Reviews

Average Customer Rating:       (Excellent) based on 1 review
Write an online review and share your thoughts with other customers.

1 of 1 found the following review helpful:
Can not be used in Canada

by Dana Ball from Toronto, ON Canada on Apr 10, 2008

The magnets are very strong, and the product is well made, but this product is designed only for the USA. The targets do not fit in Canadian electrical boxes, which are smaller than American boxes. The attachment points are the same, but in Canada these points are outside of the box, whereas in the States the points are within the box.

Was this review helpful to you? Yes No




Product Specifications


Other Information:
UPC Code: 854979001007


Resources

[Press Release - Not Available]   [Product Sheet - Not Available]   [Product Sales Manual - Not Available]

Product Statistics Points: 42510 since 4/12/2007

View Information On The Points Tabulation Process