0 items in the shopping cart
 
Multi Mark Cutout tool is designed to be used on a large variety of electrical boxes
NEW

Multi Mark Cut Out Locator

The NEW Multi Mark Cutout tool is designed to be used on a large variety of electrical boxes. Metal, plastic,composite, rectangle, round, octagon, multi gang, single gang, standard, or thin.

Our Price: $36.95
Quantity  
 
Purchase at this preferred retailer.
More Products By: Blind Mark

Help Small Brands Grow by Pinning Them - Pin It

UPC Code: 854979001038
Shipping Weight: 0.5 Pounds
Ships Immediately
Product Views: 64382


Suggest Retailers Who May Be Interested In This Product.
Qualified Retailers Can Order A Free Sample Of This Product.

Product Videos




More Information

The NEW Multi Mark Cutout tool is designed to be used on a large variety of electrical boxes. Metal, plastic,composite, rectangle, round, octagon, multi gang, single gang, standard, or thin.

 

Multi Mark: The Five Easy Steps

Step 1
Compare the Multi Mark™ locator to the outside perimeter of the electrical box you are using. Electrical boxes vary so this will show you where to make your cut(on the line inside or outside the line).

Place Multi Mark™ target in electrical box inserting the ends of the springs into the electrical box device locating holes. Take a mental note as to the direction of the arrow. If you have a multi-gang box you install the targets at each end of the box.

 

 

Step 2

With the Multi Mark™ target installed in the electrical box, cover the box up with the drywall. Position your drywall in the exact location and fasten with enough screws to safely secure the drywall.

 

 

Step 3

With the arrow on the Multi Mark™ locator facing in the same direction as Multi Mark™ target, pass the locator across the area in which the target is located. The locator will find the target and snap in place. Do not force the locator into position. Then using the appropriate template, use your pencil to mark around the locator, outlining the electrical box perimeter.

 

 

 

Step 4

Remove the locator from the drywall. Cut out the drywall using your mark as a guide. If you are using a hand saw, keep in mind, the cut on the side where the stud is must be a shallow cut. Multiple tools can then be used (hand or electric) to cut the drywall.

 

 

 

Step 5

Remove the drywall cut out and Multi Mark™ target. Note: When removing the Multi Mark™ target use two hands, holding each end of the spring pull straight out. Finish screwing down the drywall. And you’re Done!!!

 



Customer Reviews

Be the first to write a review of this product.



Product Specifications


Other Information:
UPC Code: 854979001038


Resources

[Press Release - Not Available]   [Product Sheet - Not Available]   [Product Sales Manual - Not Available]

Product Statistics Points: 64382 since 12/27/2009

View Information On The Points Tabulation Process