The New 2020 Lumber Wizard 5 Auto Tuning Laser Line Woodworking Metal Detector is the latest version of Wizard Industries flagship woodworking metal detector. A powerful precision automatic tuning handheld metal detector designed specifically for woodworkers, it helps detect small metal objects hidden inside new or used lumber. The new version features a laser line indicator auto-tuning and easier one-handed use, with automatic calibration every time the unit is turned on, and better false-positive rejection. Undetected nails, screws or other metal fragments can damage expensive joiner, planer and saw blades. Flying metal can also cause serious injury. Easy to use, the Lumber Wizard 5 helps woodworkers prevent equipment damage and personal injury. The unit includes a vibration alert, allowing it to be used in noisy workshops.
Dimensions: Length, 15"; width, 3-1/8"; height 1-1/8" ; weight, 13 oz. Detects nails, screws, wire, bullets and other metal objects buried inside of recycled wood. Types of Metal Detected: Responds equally well to all types of metal, steel, stainless steel, zinc, magnesium, and aluminum. Locates, nails, screws, staples, tacks, bullets, wire and other small metal objects that can destroy or damage planer, joiner and saw blades. Electronics: Unit operates with an automatic tuning transmit/receive circuit. Operating Frequency: 13 kHz/ 6,600 Hz. Power Requirements: One 9-volt battery; standard alkaline. Typical battery life is 40 hours. Alarm Indicators: Piezo tone beeper and LED red light indicator are used to indicate the presence of metal. Low Battery Indication: When battery drops down to 6.0 volts the unit operates with a warble tone and flashing light instead of the normal steady tone and light, indicating a low battery. The unit will operate properly as the battery drops well below 5 volts. Once below 3 volts, unit will emit constant beep tone until unit shuts off.
|
A new fully charged 9-Volt battery commonly lasts for weeks of daily use. Indications of a low 9-volt battery voltage are inconsistent detection or flashing laser. Always Use A New 9-Volt Battery. A fresh fully charged battery provides the most detection strength and uses time. A partially charged battery can cause false readings, less detection depth, and inconsistent laser. A fresh, fully charged 9-volt battery provides more than ample use time. A low battery can cost you blades, material, and lost time......
A Powerful Metal Detector Designed Specifically For Wood Workers! The New LUMBER WIZARD 5 Auto-Tuning Laser Line Woodworking Metal Detector is the latest version of Wizard Industries' flagship woodworking metal detector. |
 |
People commonly search for this type product using these type words and prhases.
hand held metal detector
hand held planer
hand held planers woodworking
hand pipe
hand planer
hand planer for woodworking
handheld metal detector wand
handheld planer
handheld wire detector
in wall stud finder
jointer planer
laser line
laser wands
laser wire
little metal detector
little wizard
little wizard 2 woodworking metal detector
little wizard 4
little wizard in woodworking metal detector
little wizard metal detector
lumber wizard
lumber wizard metal detector
magnet nail finder
metal detector
metal detector for woodworkers
metal detector for woodworking
metal detector hand wand
metal detector wand
metal detector woodworking
metal detectors
metal finder
metal lathe
musicnomad
nail detector
nail detector for wood
nail finder
nail finder for wood
needle sewing
needles for sewing
planer jointer
planer wood
planers woodworking
screw finder
sewing needle
sewing needles
small wood planer
small wood planers
stud finder
stud finder small
stud finder wall scanner
stud finder wood
stud+finder
stud-finder
thinkfun escape the room secret of dr. gravely's retreat
wall pipe finder
wood detector
wood jointer
wood lathe
wood lathes
wood planer
wood planer hand
wood planer small
wood planers
wood working
woodworkers metal detector
woodworking metal detector
woodworking metal detector little wizard
woodworking planer
zircon finder
