----- Catch it with a Cable Lasso ------

WARNING:
? Do not use tool near live wires as electrocution could occur.
? Beware of sharp edges
? Beware small parts may be swallowed.

Directions:
DRY WALL
? 1. Make1 to1 and a half inch hole where wire is required as per fig 1.
? 2. Slide face plate to end of tube until flush as per fig 2.
? 3. Screw face plate to wall with tube slightly penetrating dry wall. through hole as per figure 3 & 4.
? 4. Place metal band into tube and insert as shown in fig 5.
? 5. Drop weighted draw string down wall cavity until it passes the horizontal plane of metal band as shown in fig 6.
? 6. Pull metal band out of tool to reveal the weighted string as shown in fig 7.
? 7. Tie cable to draw string and pull down to desired location as per fig 8.

BRICK WALL
? 1. Drill 1 inch hole into brick wall as per fig 1a
? 2. Select appropriate key way and slide face plate toward the center until it stops as per fig 2a
? 3. Insert tool into wall until face plate connects with the wall as per fig 3a
? 4. Drop weighted draw string down wall cavity until it passes the horizontal plane of the metal band as per fig 4a
? 5. Pull metal band out of tube to reveal draw string as per fig 5a
? 6. Tie wire to draw string and pull down wall cavity to desired location as per fig 5a.